Stone Cleaning

Over time, stone often suffers discolouration from harsh weather. Stone cleaning is a popular service amongst some of our centrally located buildings as the constant pollution levels leave the stone surface looking dirty.

​Here at Henry Cleaning Services, we can tackle these common issues with ease by using a number of specially prepared methods and services.

What We Use

We use a state-of-the-art, market-leading Doff steam cleaning machine.

​The Doff machine works with a normal water supply. This is taken through the pump, into the hotbox, where temperatures of up to 150 degrees Celsius can be achieved.

​The low volume of super-heated water and steam (5 litres per minute) is then fed through heat resistant hoses to special nozzles and then applied to the surface.

​The surface being cleaned does not suffer any pressure damage, thermal shock or deep saturation and dries

within minutes. A range of different lances and nozzles are available.


Get in touch today to book a free test area on your building.

What we use this machine for:

  • ​Graffiti
  • Bird and vermin fouling
  • Chewing gum
  • Mould, algae and fungi

What surfaces we use this machine on:

  • Stone
  • Tiles
  • Concrete
  • Wood
  • Terracotta

Building Cleaning

​Here at Henry Cleaning Services, we specialise in building cleaning. Many of our clients have buildings with multi surface cleaning requirements, one of them being stone.

Our knowledge in the industry means we are able to put together a plan to access the most difficult to reach buildings. This means that we can clean some of the hardest to access buildings nationwide.

Some stone cleaning methods we use:​

  • a088bd_24b78a056332423c901c7d1cb841a43fmv2Scaffold
  • Aerial platform/cherry picker
  • Abseil